Blot the Stain With Water
Old pet stains on carpet surfaces can be hard to remove. This is why it’s best to leave your end-of-tenancy cleaning to professionals. However, if you’re willing to try, start by blotting the stains.
If you want to know how to remove pet stains with a natural method, start with the universal solvent. Removing as much of the mess as possible using only water is the first thing you should do.
Spray cold water on the stained parts of the carpet. Use paper towels or microfibre cloths and blot the areas.
Pick away as much of the mess as you can if there’s still any left. Use a blunt knife to scrape away any unyielding excess.
To avoid spreading the stain and further damaging the carpet, don’t scrub too hard. Never use hot water or steam as this can help the stain to set in further.
Use Dish Soap
In 1 cup of lukewarm water, mix in half a teaspoon of dish soap. Do a thorough stir of the mixture until the water is sudsy.
Pour this straight onto the carpet stains. Make sure to get the entire stained area covered. You’ll want to soak the carpet stains with the soap mixture.
With a paper towel, blot the stained area until it’s dry. Try soaking up the paper towel with as much water from the mixture as possible. Use a vacuum over the soaked area if you find it difficult to remove the mixture’s remaining water.
Repeat the process of soaking, blotting, and drying until the stain is gone. Once you’re done, be sure to rinse the stained area with lukewarm water to remove any remaining soap. Use a paper towel to dry the area.
Use Vinegar, Baking Soda, and Hydrogen Peroxide
If a pet stain on carpet survived water and soap, it’s time to add vinegar and hydrogen peroxide.
Vinegar is an acidic natural ingredient that you’ll have in your pantry. It’s one of the most versatile household cleaning solutions.
Baking soda is a common ingredient in baking. It’s also great as a natural deodorizer. You’ll need this in the final steps of this pet stain cleaning method.
Hydrogen peroxide is also a versatile solution that’s also safe for the environment. It’s a powerful antiseptic that can brighten dull or stained surfaces.
Peroxide is gentler than bleach, so you don’t have to worry about discolouration. It doesn’t have the pungent fumes of bleach and instead leaves a light and fresh scent.
Besides vinegar, baking soda, and hydrogen peroxide, prepare a rag and paper towels. You’ll also need a scrub brush or a toothbrush to work in the mixtures you’ll be using on the stain. Wear some gloves to protect your skin while you’re doing this.
Step 1: Soak With a Vinegar Solution
Mix 1 part water and 1 part white vinegar together. You’ll need to be able to soak the carpet stains. Be sure to make enough of the vinegar solution to do this.
Soak a piece of rag in the vinegar solution. Use this to blot the carpet stain. Press hard enough as you do this so the solution can penetrate deep into the stain. Remember not to rub the stain, so you don’t spread it.
Now, pour a bit of the vinegar solution straight onto the carpet stain. Be sure to cover the entire stained area so that it’s soaked. Avoid getting too much of the solution on the carpet’s unaffected areas.
A scrub brush (a toothbrush will also do), scrub the solution into the stain. Apply ample pressure on the brush as you scrub back and forth across the stain’s surface.
After this, dry the affected area by blotting it with as many paper towels as needed.
Step 2: Coat With Baking Soda
Once you’re done drying, sprinkle baking soda over the stained area. Any store-bought baking soda is fine. Create a thin layer of baking soda across the carpet stain’s entire surface.
Step 3: Scrub With Dish Soap and Hydrogen Peroxide
Mix half a cup of 3% hydrogen peroxide with a teaspoon of dish soap. Stir the mixture well.
Next, pour some of the soap and peroxide mixture onto the carpet stain. Scrub it in with a back and forth motion. Again, press down hard as you scrub to work the mixture together with the baking soda deep into the stain.
When you’re done, use paper towels to dry the affected area again. Dry the area as much as possible, so there are no leftovers of the mixture on the carpet. To ensure there’s no excess liquid on the carpet, use a vacuum and run it over the area.
Now You Know How to Clean Old Pet Stain on Carpet
These are some methods and solutions you can use to remove an old pet stain on carpet floors. You can start with water and work with more potent vinegar, baking soda, and peroxide mixtures.
If they don’t work, you’re left asking how to get rid of pet stains so you can save charges from your security deposit. Hiring professionals can be a more prudent choice for your end-of-tenancy cleaning.
Professional cleaners use special techniques and cleaning solutions that suit your carpet best. If you want to know more about cleaning services in London, contact us today!